|
Frequently Asked Questions |
- What is a thermofoil door?
Typically a thermofoil cabinet door is a one piece door machined out of 3/4" MDF
and laminated with a vinyl film which is applied with extreme heat and
pressure. It becomes a very low maintenance door that lasts for many
years without showing wear like a solid wood door.
Back to Top
- Why do some thermofoil doors delaminate?
In most cases, delamination is caused by the manufacturer of the door not
following the "rules" when making the door. Here at Advanced Door
Concepts, Inc., we refuse to compromise on the quality of the board,
glue, applications and pressing cycles which can cause failures if not
properly maintained. We constantly monitor the temperatures of the
press cycles to insure a good bond of the vinyl to the substrate.
Back to Top
- Why should I use doors from Advanced Door Concepts, Inc., instead of another door company?
Here
at Advanced Door Concepts, Inc., we not only make a high quality door,
but we back all of our products with our outstanding customer service.
After all, what good is it to you, our customer, if you have a problem
such as ordering 1 door short or your customer adding something on and
you have to wait for 2-3 weeks to get a couple of parts to complete the
job so you can get paid. We understand your problems and do all we can
to help you with them in as timely a fashion as possible.
Back to Top
- Do you offer a warranty?
We warranty our white vinyl doors against yellowing and/or any manufacturing defects of all of our vinyl doors
for five years, under normal wear and tear conditions. Alterations to original material is not warranted. Warranty
is void if there is direct exposure to excessive heat, and/or sunlight, i.e. range area. We reserve the right to inspect
such defects if such arise. Our doors are designed for interior cabinetry only. Original invoice is necessary for
any warranty work to be honored. We need the defective door back in order for it to be replaced at no charge.
Replacement limited to product only, no labor, etc. Slight variations in profiles may occur in time due to tooling.
Slight color variations may occur if original color brand is unavailable. Check for availability.
Back to Top

Advanced Door Concepts, Inc. 222 Commercial Place Sebring, Florida 33876 Phone: 863-655-3667 (Door) Fax: 863-655-3663 Email: info@advdoor.com
|